Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 741

SEC-1119 5 SEC-1119 Message Secure mode has been enabled. Message Type LOG Severity INFO Probable Cause Indicates the secure Fabric OS was enabled by the secModeEnable command. Recommended Action Verify the security event was planned. If the security event was planned, there is no action required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. SEC-1121 Message Time is out of range when . Message Type LOG Severity ERROR Probable Cause Indicates the time on the switch is not synchronized with the primary fabric configuration server (FCS), the data packet is corrupted, or a replay attack is launched on the switch. Recommended Action Verify the security event was planned. If the security event was planned, verify that all switches in the fabric are in time synchronization with the primary FCS and that no external entity is trying to access the fabric. When verification is complete, retry the operation. SEC-1122 Message Error code: , . Message Type LOG Severity INFO Probable Cause Indicates that one of the switches in the fabric could not communicate with the primary fabric configuration server (FCS). Recommended Action Run the fabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. Fabric OS Message Reference 719 53-1002749-01