Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 848

5 SULB-1004 Recommended Action No action is required. Run the firmwareDownloadStatus command for more information. SULB-1004 Message Firmwarecommit has completed. Message Type AUDIT | LOG Class FIRMWARE Severity INFO Probable Cause Indicates that the firmwareCommit command has completed successfully. Recommended Action No action is required. Run the firmwareDownloadStatus command for more information. SULB-1005 Message Current Active CP is preparing to failover. Message Type LOG Severity INFO Probable Cause Indicates that the active control processor (CP) is about to reboot. The standby CP is taking over as the active CP. Recommended Action No action is required. The firmwareDownload command is progressing as expected. Run the firmwareDownloadStatus command for more information. SULB-1006 Message Forced failover succeeded. New Active CP is running new firmware. Message Type LOG Severity INFO Probable Cause Indicates that the previous standby control processor (CP) has now become the active CP and is running the new firmware version. Recommended Action No action is required. The firmwareDownload command is progressing as expected. Run the firmwareDownloadStatus command for more information. 826 Fabric OS Message Reference 53-1002749-01