Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 185

BL-1000 5 BL Messages BL-1000 Message Initializing ports... Message Type LOG Severity INFO Probable Cause Indicates that the switch has started initializing the ports. Recommended Action No action is required. BL-1001 Message Port initialization completed. Message Type LOG Severity INFO Probable Cause Indicates that the switch has completed initializing the ports. Recommended Action No action is required. BL-1002 Message Init Failed: slot DISABLED because internal ports were not ONLINE, . Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the blade initiation failed because one or more of the internal ports was not online. The blade is faulted. Recommended Action Make sure that the blade is seated correctly. If the blade is seated correctly, execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. Additional blade fault messages precede and follow this error, providing more information. Refer to other error messages for recommended action. If the message persists, replace the blade. Fabric OS Message Reference 163 53-1002749-01