Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 489

FW-1182 5 FW-1182 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has risen above the high boundary. This error generally indicates a deteriorating fabric hardware. Recommended Action Check your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that all optical hardware is clean. FW-1183 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Frequent fluctuations in CRC errors generally indicate an aging fabric. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Check your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that all optical hardware is clean. FW-1184 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the percentage of incoming traffic that the port experiences has changed. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Fabric OS Message Reference 467 53-1002749-01