Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 385

FCR-1066 5 FCR-1066 Message Fabric on port has the same fabric ID as another fabric. Message Type LOG Severity ERROR Probable Cause Indicates that either the fabric split, or there is another fabric (possibly the backbone) that has the same fabric ID as the fabric connected to the specified port. Recommended Action If the fabric split, merge the fabrics and manually re-enable the port. If there is another fabric with the same ID, change the fabric ID for the port using the portCfgExport or portcfgVExport commands. FCR-1067 Message Zone configurations, total LSAN zones and aliases, exceeded on port by entries; max entries: . Message Type LOG Severity WARNING Probable Cause Indicates that the total number of zone configurations created in connected fabric exceeds the maximum number supported by the Fibre Channel. The limit includes both active and configured information that is part of be zoning database in the edge fabric. Non-LSAN zones are not counted in the limit. Recommended Action Limit the logical storage area network (LSAN) zoning-related zone configuration in the edge fabric connected to this port. FCR-1068 Message The FC Routing service is disabled. Message Type LOG Severity INFO Probable Cause Indicates that the FC Routing service is disabled. This is caused by issuing the fosConfig --disable fcr, configDefault, or the configDownload command with the fcrState set to 2 (disabled). Note that the FC Routing service is disabled by the factory. Recommended Action No action is required. Fabric OS Message Reference 363 53-1002749-01