Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 725

SEC-1065 5 Recommended Action Run the secCertUtil show -fcapall command to verify that all PKI objects are valid. If PKI objects are not valid, generate the PKI objects and install the certificate by following the field upgrade process. SEC-1065 Message Invalid character in list. Message Type LOG Severity ERROR Probable Cause Indicates the input list has an invalid character. Recommended Action Enter valid input. SEC-1069 Message Security Database is corrupted. Message Type LOG Severity ERROR Probable Cause Indicates the security database is corrupted for unknown reasons. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1071 Message No new security policy data to apply. Message Type LOG Severity ERROR Probable Cause Indicates that no changes in the defined security policy database need to be activated at this time. Recommended Action Verify that the security event was planned. First change some policy definitions, and then run the secPolicyActivate command to activate the policies. Fabric OS Message Reference 703 53-1002749-01