Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 876

5 SYSM-1001 SYSM Messages SYSM-1001 Message No memory. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates the switch has run out of system memory. Recommended Action Run the memShow command to view the switch memory usage. Reboot or power cycle the switch. Run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. SYSM-1002 Message , Switch: . Message Type LOG Severity INFO Probable Cause Indicates a user has executed either the switchShutdown or switchReboot command. All services are brought down for a logical switch. Recommended Action No action is required if the switchShutdown or switchReboot command was executed intentionally. If the switchShutdown command was run, you must run the switchStart command to restart traffic on the logical switch. SYSM-1003 Message , Switch: . Message Type LOG Severity INFO Probable Cause Indicates the user executed the switchStart or switchReboot command. All services are brought back up after a temporary shutdown of the logical switch. Recommended Action No action is required if the switchStart command was executed intentionally. Because reinitializing a switch is a disruptive operation and can stop I/O traffic, you may have to stop and restart the traffic during this process. 854 Fabric OS Message Reference 53-1002749-01