Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 395

FCR-1097 5 FCR-1097 Message Failed to get for message: port , retval . Message Type LOG Severity ERROR Probable Cause Indicates that the authentication process failed to get a particular authentication value at certain phase. Data type is the payload or structure that failed to get memory. Recommended Action Usually this problem is transient. The authentication may fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. FCR-1098 Message Invalid message code for message: port . Message Type LOG Severity ERROR Probable Cause Indicates the receiving payload does not have valid message code for a particular authentication phase. Recommended Action Usually this problem is transient. The authentication may fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Fabric OS Message Reference 373 53-1002749-01