Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 205

BM-1004 5 Recommended Action Execute the slotPowerOff and slotPowerOn commands or reseat the affected blade. BM-1004 Message Blade firmware on slot is not consistent with system firmware . Auto-leveling blade firmware to match system firmware. Message Type LOG Severity INFO Probable Cause Indicates that the policy of the specified blade is to auto-level the blade firmware to the system firmware. This may be due to one of the following reasons: • Blade firmware was detected to be different from the control processor (CP) firmware due to a firmware upgrade. • The blade was recently inserted and had a different version of the firmware loaded. Recommended Action No action is required. The blade will automatically download the updated firmware. BM-1005 Message Firmwaredownload timed-out for blade in slot . Faulting blade. Message Type LOG Severity WARNING Probable Cause Indicates that the firmwareDownload command failed for the blade in the specified slot. Recommended Action Execute the slotPowerOff and slotPowerOn commands or reseat the affected blade. BM-1006 Message Blade is not configured. Persistently disabling all ports for blade in slot . Message Type LOG Severity INFO Probable Cause Indicates that the policy of the specified blade is set to persistently disable all ports the first time the blade is detected. The message indicates either of the following: • The blade was detected in this slot for the first time. • The blade was configured under a different mode. Fabric OS Message Reference 183 53-1002749-01