Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 164

5 ANV-1007 ANV-1007 Message S,C: ANVIL PASS 1 low buff pool fault: 0x. Message Type LOG Severity CRITICAL Probable Cause Indicates that Anvil Pass 1 is running out of free buffers, which may cause chip fault. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. ANV-1008 Message S,C: MAC-VID classifier table is full. No space for new entry. Message Type LOG Severity ERROR Probable Cause Indicates that the Media Access Control (MAC) VLAN ID (VID) classifier table is full and no more entries can be added. Recommended Action Delete some of the existing unused rules using the portcfg arp command and then add new entries. ANV-1015 Message Port reinitialized due to Link Reset failure on internal port S,P(). Message Type LOG Severity WARNING Probable Cause Indicates that the specified port is re-initialized due to link reset failure. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. 142 Fabric OS Message Reference 53-1002749-01