Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 796

5 SNMP-1001 SNMP Messages SNMP-1001 Message SNMP service is not available . Message Type LOG Severity ERROR Probable Cause Indicates that the Simple Network Management Protocol (SNMP) service could not be started because of the specified reason. Therefore, you will not be able to query the switch through SNMP. Recommended Action Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the specified reason is an initialization failure, restart the switch using the reboot command. SNMP-1002 Message SNMP initialization failed. Message Type LOG Severity ERROR Probable Cause Indicates that the initialization of the SNMP service failed and therefore you will not be able to query the switch through SNMP. Recommended Action Restart or power cycle the switch. This will automatically initialize SNMP. SNMP-1003 Message Distribution of Community Strings to Secure Fabric failed. Message Type LOG Severity ERROR Probable Cause Indicates that the changes in the SNMP community strings could not be propagated to other switches in the secure fabric. Recommended Action Retry changing the SNMP community strings on the primary switch. 774 Fabric OS Message Reference 53-1002749-01