Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 439

FICN-2085 5 FICN-2085 Message FICON or FCP Emulation Enabled FCIP Tunnel is Up on VEPort=. Message Type LOG Severity INFO Probable Cause Indicates a FICON or Fibre Channel Protocol (FCP) emulation-enabled FCIP tunnel has been established successfully to the peer switch. Recommended Action No action is required. FICN-2086 Message FICON or FCP Emulation Enabled FCIP Tunnel is Down on VEport=. Message Type LOG Severity ERROR Probable Cause Indicates a FICON or Fibre Channel Protocol (FCP) emulation-enabled FCIP tunnel to the peer switch has been terminated. Recommended Action This is an unexpected event; contact your vendor's customer support for assistance. FICN-2087 Message FICON connected 3900 printer discovered Path=0x-invalid compression mode. Message Type LOG Severity ERROR Probable Cause Indicates that FICON Printer emulation is enabled, but cannot be performed for this device because the compression mode on the tunnel is not set to None or Aggressive. Recommended Action If you desire FICON Printer emulation for this device, modify the tunnel compression mode to None (mode 0) or Aggressive (mode 3). Fabric OS Message Reference 417 53-1002749-01