Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 326

5 FABR-1001 FABR Messages FABR-1001 Message port , . Message Type LOG Severity WARNING Probable Cause Indicates that the specified switch port is isolated because of a segmentation resulting from mismatched configuration parameters. Recommended Action Based on the segmentation reason displayed with the message, look for a possible mismatch of relevant configuration parameters in the switches at both ends of the link. Run the configure command to modify the appropriate switch parameters on both the local and remote switch. FABR-1002 Message fabGaid: no free multicast alias IDs. Message Type LOG Severity WARNING Probable Cause Indicates that the fabric does not have any available multicast alias IDs to assign to the alias server. Recommended Action Verify alias IDs using the fabricShow command on the principal switch. FABR-1003 Message port : ILS bad size , wanted . Message Type LOG Severity WARNING Probable Cause Indicates that an internal link service (ILS) information unit of invalid size has been received. The neighbor switch has sent a payload with an invalid size. 304 Fabric OS Message Reference 53-1002749-01