Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 925

ZONE-1059 5 ZONE-1059 Message Unexpected TI routing behavior or a potentially unroutable TI configuration has been detected on local domain . Message Type LOG Severity WARNING Probable Cause Indicates that the current fabric topology and TI zone configuration may result in an unroutable condition or an unexpected routing behavior. Recommended Action Execute the zone --showTIerrors command on the specified switch to report the conflicting configuration details. ZONE-1060 Message Non-TI and TI failover-enabled traffic restricted to domain due to TI failover-disabled zoning. Message Type LOG Severity WARNING Probable Cause Indicates that only TI failover-disabled paths remain to reach the specified domain causing non-TI and TI failover traffic disruption. Recommended Action Add or restore the non-TI or TI failover-enabled inter-switch links (ISLs) to the specified domain. ZONE-1061 Message Some trunk members are missing from failover disabled active TI zones. Message Type LOG Severity WARNING Probable Cause Indicates that some members in the trunk group are not added to the failover-disabled TI zone. This will result in traffic disruption if the trunk member goes down. Recommended Action If any trunk member is included in the TI failover-disabled zone path, then always add all members from that group. Execute the zone --showTItrunkerrors command on the switch to find the missing trunk members in the TI zone. Fabric OS Message Reference 903 53-1002749-01