Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 329

FABR-1009 5 FABR-1009 Message . Message Type LOG Severity WARNING Probable Cause Indicates that errors were reported during the exchange fabric parameter state; cannot allocate domain list due to a faulty exchange fabric parameter (EFP) type. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action The fabric daemon will discard the EFP. The system will recover through the EFP retrial process. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1010 Message . Message Type LOG Severity WARNING Probable Cause Indicates that errors occurred while cleaning up the request domain ID (RDI). The error description provides further details. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1011 Message . Message Type LOG | FFDC Severity ERROR Probable Cause Indicates that the Fabric OS is unable to inform the Fabric OS State Synchronization Management module (FSSME) that the fabric is stable or unstable. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Fabric OS Message Reference 307 53-1002749-01