Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 147

AG-1012 5 AG-1012 Message Sending logout (LOGO) request failed on N_Port . Message Type LOG Severity WARNING Probable Cause Indicates that there was a failure sending an N_Port logout request from the Access Gateway to the fabric switch. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AG-1013 Message F_Ports mapped to N_Port failed over to other N_Port(s). Message Type LOG Severity INFO Probable Cause Indicates that the specified N_Port is failing over to other N_Ports connected to the same fabric. Recommended Action Execute the ag --mapshow command to display updated F_Port-to-N_Port mapping. AG-1014 Message Failing back F_Ports mapped to N_Port . Message Type LOG Severity INFO Probable Cause Indicates that the specified N_Port is failing back F_Ports mapped to it. Recommended Action Execute the ag --mapshow command to display updated F_Port-to-N_Port mapping. Fabric OS Message Reference 125 53-1002749-01