Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 477

FW-1128 5 FW-1128 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of segmentations has changed from a value outside of the acceptable range to a value within the acceptable range. Segmentation changes might occur due to the following reasons: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1129 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of zone changes has changed. Zone changes occur when there is a change to the effective zone configuration. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1130 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of zone changes has fallen below the low boundary. Zone changes occur when there is a change to the effective zone configuration. A low number of zone configuration changes means that the fabric is functioning normally. Fabric OS Message Reference 455 53-1002749-01