Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 304

5 EM-1014 EM-1014 Message Unable to read sensor on (). Message Type LOG Severity ERROR Probable Cause Indicates that the environmental monitor (EM) was unable to access the sensors on the specified field-replaceable unit (FRU). Recommended Action Reseat the FRU. If the problem persists, replace the FRU. EM-1015 Message Warm recovery failed (). Message Type LOG Severity WARNING Probable Cause Indicates that a problem was discovered when performing consistency checks during a warm boot. Recommended Action Monitor the switch. If the problem persists, restart or power cycle the switch. EM-1016 Message Cold recovery failed (). Message Type LOG Severity WARNING Probable Cause Indicates that a problem was discovered when performing consistency checks during a cold boot. Recommended Action Monitor the switch. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 282 Fabric OS Message Reference 53-1002749-01