Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 216

5 C3-1001 C3 Messages C3-1001 Message Port failed due to SFP validation failure. Check if the SFP is valid for the configuration. Message Type LOG Severity ERROR Probable Cause Indicates a deteriorated small form-factor pluggable (SFP) transceiver, an incompatible SFP transceiver pair, or a faulty cable between the peer ports. Recommended Action Verify that compatible SFP transceivers are used on the peer ports, the SFP transceivers have not deteriorated, and the Fibre Channel cable is not faulty. Replace the SFP transceivers or the cable if necessary. C3-1002 Message Port chip failed due to an internal error. Message Type LOG | FFDC Severity ERROR Probable Cause Indicates an internal error. All the ports on the blade or switch will be disrupted. Recommended Action To recover a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade. To recover a non-bladed system, execute the fastBoot command on the switch. C3-1004 Message S,C: Invalid DMA ch pointer, chan:, good_addr:0x bad_addr:0x. Message Type LOG Severity ERROR Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action Reboot the system at the next maintenance window. If the problem persists, replace the blade. 194 Fabric OS Message Reference 53-1002749-01