Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 573

HIL-1202 5 HIL-1202 Message Blower faulted, speed ( RPM) below threshold. Message Type LOG Severity ERROR Probable Cause Indicates that the specified fan speed (in RPM) has fallen below the minimum threshold. Recommended Action Replace the fan FRU. HIL-1203 Message Fan faulted, speed ( RPM) above threshold. Message Type LOG Severity ERROR Probable Cause Indicates that the specified fan speed (in RPM) has risen above the maximum threshold. A high speed does not necessarily mean that the fan is faulty. Recommended Action Run the tempShow command to verify that the switch temperatures are within operational ranges. Refer to the hardware reference manual for the temperature range of your switch. Make sure that the area is well-ventilated and that the room temperature is within the operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the fan continues to generate this message, replace the fan FRU. HIL-1204 Message Fan faulted, speed ( RPM) below threshold. Message Type LOG Severity ERROR Probable Cause Indicates that the specified fan speed (in RPM) has fallen below the minimum threshold. This message is specific to non-bladed switches. Recommended Action Replace the fan field-replaceable unit (FRU). For switches that do not have FRUs, replace the entire switch. Fabric OS Message Reference 551 53-1002749-01