Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 546

5 FW-1445 Recommended Replace the FRU. Action FW-1445 Message Four power supplies are now required for 2X redundancy, Switch Status Policy values changed. Message Type LOG Severity INFO Probable Cause Indicates that the switch requires four power supplies and the prior Switch Status Policy parameters will be overwritten to reflect this. The presence of an AP blade means that more than one power supply may be required to provide adequate power. So (even if the AP blade is powered down or removed) the Switch Status Policy values will now reflect the need for four power supplies to maintain full (2X) redundancy. Recommended Action No action required unless there are fewer than four power supplies active in the chassis. If there are fewer than four, insert additional power supplies so that there are four active power supplies. FW-1446 Message Four power supplies now required for 2X redundancy, not enforced by Fabric Watch due to Switch Status Policy overridden by User. Message Type LOG Severity WARNING Probable Cause Indicates that the switch now requires four power supplies for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to the number of power supplies. So those values will not be automatically changed. With no AP blades, the default value is 3 (out of service), indicating switch status is down or 0 indicating no checking for switch status marginal. When an AP blade is or has been present, the default value is 2 (out of service) indicating switch status is down or 1 (out of service) indicating switch status is marginal. Recommended Action To maintain full (2X) redundancy and proper monitoring by Fabric Watch, supply four active power supplies and enter the default values associated with the presence of an AP blade using the switchStatusPolicySet command. 524 Fabric OS Message Reference 53-1002749-01