Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 230

5 CDR-1004 CDR-1004 Message S,C: Invalid DMA ch pointer, chan:, good_addr:0x bad_addr:0x. Message Type LOG Severity ERROR Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action Restart the system at the next maintenance window. If the problem persists, replace the blade. CDR-1005 Message S,P(): best effort QoS will be turned off at next port state change as it is not supported under this configuration. Message Type LOG Severity WARNING Probable Cause Indicates that quality of service (QoS) will be turned off automatically at the next port state change because best effort QoS is no longer supported on 4 Gbps or 8 Gbps platform long distance ports. Recommended Action No action is required. CDR-1006 Message S,P(): QoS overwrites portcfglongdistance vc_translation_link_init. ARB will be used on the link. Message Type LOG Severity WARNING Probable Cause Indicates that quality of service (QoS) has overwritten the fill word IDLE used on the long distance links. Arbitrated loop (ARB) will be used on the link. Recommended Action No action is required. 208 Fabric OS Message Reference 53-1002749-01