Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 861

SULB-1035 5 SULB-1035 Message An error has occurred during relocation of the internal image. Message Type AUDIT | LOG Class FIRMWARE Severity ERROR Probable Cause Indicates that an error has occurred during the relocation of the internal image. The error may be caused by inconsistent internal firmware image. It may also be caused by an internal Ethernet issue or a persistent storage hardware failure. Recommended Action Reset the switch. This will cause the internal image to be relocated again. If the problem persists, contact your switch service provider. SULB-1036 Message . Message Type LOG Severity INFO Probable Cause Indicates the version running in the system. This is generally logged before download and after download of the firmware to store version information. Recommended Action No action is required. SULB-1037 Message HCL failed. Reboot the switch manually using the reboot command. However, it will disrupt the FC traffic. Message Type AUDIT | LOG Class FIRMWARE Severity ERROR Probable Cause Indicates that Hot Code Load (HCL) has failed. Many reasons, such as a domain not confirmed, can cause this failure. Recommended Action Run the reboot command to reboot the switch manually. Fabric OS Message Reference 839 53-1002749-01