Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 45

Reading the system messages 1 Clearing the Audit message log To clear the Audit message log for a particular switch instance, perform the following steps. 1. Log in to the switch as admin. 2. Execute the auditDump -c command to clear all Audit messages from memory. Reading the system messages This section provides information about reading the RASLog and Audit messages. Reading a RAS system message This section provides information about reading system messages. The following example shows the format of a RAS system error message. , [], , , , , The following example shows a sample message from the error log. 2011/02/10-14:18:04, [SS-1000], 88, SLOT 6 | FFDC | CHASSIS, INFO, ESNSVT_DCX, supportSave has uploaded support information to the host with IP address 192.0.2.2. 2011/02/10-14:13:34, [SS-1001], 87, SLOT 6/1 | FFDC | CHASSIS, WARNING, ESNSVT_DCX, supportSave's upload operation to host IP address aborted. 2011/02/10-15:44:51, [SEC-1203], 89, SLOT 6 | FFDC | FID 128, INFO, ESNSVT_DCX, Login information: Login successful via TELNET/SSH/RSH. IP Addr:192.0.2.2. NOTE Any reference to slot 0 in a system message is a reference to the blade within the switch platform, for example, Brocade DCX contains FC8-48 blade, FC8-32 blade, FC8-16 blade, and so on. The fields in the error message are described in Table 4. TABLE 4 System message field description Variable name Description Time Stamp Event ID The system time (UTC) when the message was generated on the switch. The RASLog subsystem supports an internationalized time stamp format based on the "LOCAL" setting. The message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual. Note that not all message numbers are used; there can be gaps in the numeric message sequence. Fabric OS Message Reference 23 53-1002749-01