Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 485

FW-1170 5 FW-1170 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of signal losses that the port experiences has risen above the high boundary. Loss of signal generally indicates a physical problem. Recommended Action Check both ends of your cable connection. Verify that the cable is not faulty. FW-1171 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of signal losses that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Frequent loss of signal generally indicates a physical problem. Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. FW-1172 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of protocol errors that the port experiences has changed. Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems. Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. Fabric OS Message Reference 463 53-1002749-01