Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 434

5 FICN-1115 FICN-1115 Message HostPrintEgr:CmdReject Sense Data Rcvd:Path=0x LastCmds=0x SenseData:Bytes0-0xB=0x. Message Type LOG Severity ERROR Probable Cause Indicates an active Print emulation sequence received Command Reject Sense data from the device. Recommended Action If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1116 Message HostPrintEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x LastCmd=0x LastStatus=0x. Message Type LOG Severity ERROR Probable Cause Indicates that a Link Level Reject (LRJ) was received from a device indicating that the Control Unit has lost the logical path to the Logical Partition (LPAR). Recommended Action If this was an unexpected event; contact your vendor's customer support for assistance. FICN-1117 Message HostPrintIng:FICON Cancel received Path=0x state=0x. Message Type LOG Severity WARNING Probable Cause Indicates a job was canceled during Print write pipelining. Recommended Action If this was an unexpected event (cancel is normally an operator event), contact your vendor's customer support for assistance. 412 Fabric OS Message Reference 53-1002749-01