Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 520

5 FW-1339 FW-1339 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of Device Connection Control (DCC) violations has changed from a value outside of the acceptable range to a value within the acceptable range. DCC violations indicate that an unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically HBA ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI) request, the World Wide Name (WWN) specified in the FLOGI is validated to be connected to the authorized port. Enforcement for private loop devices not performing FLOGI is done through the name server. Recommended Action No action is required. FW-1340 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of login violations has changed. Login violations indicate that a login failure has been detected. Recommended Action Execute the errShow command to determine the IP location of the login attempt. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. FW-1341 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of login violations has fallen below the low boundary. Login violations indicate that a login failure has been detected. Recommended Action No action is required. 498 Fabric OS Message Reference 53-1002749-01