Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 624

5 LSDB-1001 LSDB Messages LSDB-1001 Message Link State ID out of range. Message Type LOG Severity ERROR Probable Cause Indicates that the specified link state ID is out of the acceptable range. The valid link state ID is the same as the valid domain ID, with a range from 1 through 239. The switch will discard the record because it is not supported. Recommended Action No action is required. LSDB-1002 Message Local Link State Record reached max incarnation. Message Type LOG Severity INFO Probable Cause Indicates that the local link state record (LSR) reached the maximum number of incarnations. An "incarnation" is a progressive number that identifies the most recent version of the link state record (LSR). The switch generates its local LSR when first enabled. The incarnation number will begin again at 0x80000001 after reaching 0x7FFFFFFF. Recommended Action No action is required. LSDB-1003 Message No database entry for local Link State Record, domain . Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that there is no local link state record (LSR) entry in the link state database (LSDB). The switch should always generate its own local entry when starting up. An "incarnation" is a progressive number that identifies the most recent version of the LSR. The switch generates its local LSR when first enabled. By disabling and enabling the switch, a new local LSR is generated. 602 Fabric OS Message Reference 53-1002749-01