Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 714

5 SEC-1024 SEC-1024 Message The security database is too large to fit in flash. Message Type LOG Severity INFO Probable Cause Indicates the size of the security database is too large for the flash memory. The size of the security database increases with the number of entries in each policy. Recommended Action Reduce the size of the security database by reducing the number of entries within each policy. SEC-1025 Message Invalid IP address () detected. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can occur only when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1026 Message Invalid format or character in switch member . Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can occur only when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. 692 Fabric OS Message Reference 53-1002749-01