Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 915

ZONE-1007 5 Recommended Action No action is required. ZONE-1007 Message Ioctl () in () at port () returns code () and reason string (). Message Type LOG Severity INFO Probable Cause Indicates that frame filter logic reported a failure during the specified I/O Control (IOCTL) call. This is usually a programming error when adding CAM entries before the filter setup. Recommended Action Avoid this problem in the following ways: • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. ZONE-1010 Message Duplicate entries in zone () specification. Message Type LOG Severity WARNING Probable Cause Indicates that there are duplicate entries in the specified zone object. This message occurs only when enabling a zone configuration. Recommended Action Check the members of the zone using the cfgShow command. Delete the duplicate member using the zoneRemove command. ZONE-1013 Message QuickLoop not supported. Message Type LOG Severity WARNING Probable Cause Indicates that the QuickLoop feature is not supported in the current version of Fabric OS. QuickLoop zones are not supported in Fabric OS version 4.x or later. Even if the QuickLoop zoning configuration is enabled on the switch, it will not be supported. Recommended Action Edit the zone database to remove the QuickLoop zoning definition in the effective configuration. Fabric OS Message Reference 893 53-1002749-01