Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 711

SEC-1003 5 SEC-1003 Message Fail to download security data to domain after retries. Message Type LOG Severity WARNING Probable Cause Indicates the specified domain failed to download security data after the specified number of attempts, and that the failed switch encountered an error accepting the database download. The primary switch will segment the failed switch after 30 tries. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1005 Message Primary FCS receives data request from domain . Message Type LOG Severity INFO Probable Cause Indicates the primary fabric configuration server (FCS) received a data request from the specified domain. For example, if the switch fails to update the database or is attacked (data injection), a message is generated to the primary FCS to try to correct and resynchronize with the rest of the switches in the fabric. Recommended Action Use the secFabricShow command to check whether any of the switches in the fabric encountered an error. If one or more of the switches is not in the ready state, and you have reason to believe that the error is the result of a possible security breach, take appropriate action as defined by your enterprise security policy. SEC-1006 Message Security statistics error: Failed to reset due to invalid . Message Type LOG Severity WARNING Probable Cause Indicates that invalid data has been received for any statistic-related command for security (secStatsShow or secStatsReset). The counter is updated automatically when a security violation occurs. This message may also occur if the updating counter fails. Recommended Action If the message is the result of a user command, retry the statistic command. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 689 53-1002749-01