Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 859

SULB-1026 5 Recommended Action Wait for the blade to reboot. SULB-1026 Message Firmware commit operation started on the blade in slot . Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that the firmwareCommit command has started on the specified blade. The operation may be a normal part of firmware download, or it may have started to repair the secondary partition of the blade if the secondary partition is corrupted. Recommended Action Wait for the firmware commit operation to complete. SULB-1030 Message The switch has rebooted during relocating the internal firmware image. Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that there may be an error caused by an unexpected disruption of the firmwareDownload command; for example, by powering the switch off and on in the middle of a firmware download. The error may also be caused by persistent storage hardware failure or by a software error. Recommended Action The firmwareDownload command will continue after the switch has rebooted. Run the firmwareDownloadStatus command to monitor progress. If the problem persists, contact your switch service provider. SULB-1031 Message The switch is relocating an internal firmware image. Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that the switch has rebooted with the new firmware and is relocating the application processor (AP) firmware. Fabric OS Message Reference 837 53-1002749-01