Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 924

5 ZONE-1054 ZONE-1054 Message Default Zone All Access mode is set with Frame Redirection zones. Message Type LOG Severity WARNING Probable Cause Indicates that the Default Zone All Access mode will not grant all access behavior when the frame redirection zones are defined. Recommended Action Remove frame redirection zones or set the Default Zone access mode to No Access using the defzone --noaccess command. ZONE-1057 Message TI Zone has domain running pre FOS6.4.0 firmware. TI member (Domain , Index ) is not supported. Message Type LOG Severity WARNING Probable Cause Indicates that an unsupported port index (> 511) is present in the TI zone path or the routing may not be set up correctly. Recommended Action Remove the port index from the TI zone using the zone --remove name command. ZONE-1058 Message Domain present in TI zone became unreachable due to failover disabled mode. Message Type LOG Severity WARNING Probable Cause Indicates that the domain present in the TI zone path is unreachable. This occurs if the TI zone paths are unavailable or the TI zone is set up incorrectly. Recommended Action Verify that the paths defined by TI zones are online or remove the domain from the TI zone using the zone --delete name command. 902 Fabric OS Message Reference 53-1002749-01