Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 731

SEC-1087 5 SEC-1087 Message The security database is larger than the data distribution limit of fabric bytes. Message Type LOG Severity ERROR Probable Cause Indicates the security database has more data than can be distributed to some of the switches in the fabric. Recommended Action Reduce the number of entries in the security policies to decrease the security database size. SEC-1088 Message Cannot execute the command. Please try later. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1089 Message Policy name was not found. Message Type LOG Severity ERROR Probable Cause Indicates the security policy name in the secPolicyAdd command does not exist. Recommended Action Create the appropriate security policy first, and then use its name in the secPolicyAdd command to add new members. Fabric OS Message Reference 709 53-1002749-01