Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 493

FW-1194 5 FW-1194 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of state changes that the port experiences has risen above the high boundary. The state of the port has changed for one of the following reasons: the port has gone offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1195 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of state changes that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. The state of the port has changed for one of the following reasons: the port has gone offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1196 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of link resets that the port experiences has changed. Link resets occur due to link timeout errors that indicate no frame activity. Recommended Action Check both ends of your cable connection. Verify if the cable and small form-factor pluggables (SFPs) are faulty. Fabric OS Message Reference 471 53-1002749-01