Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 918

5 ZONE-1026 ZONE-1026 Message port Out of CAM entries. Message Type LOG Severity INFO Probable Cause Indicates that the total number of entries of S_ID CAM is above the limit while creating or adding a zone group. The maximum number of CAM entries allowed depends on the application-specific integrated circuit (ASIC). Recommended Action If hardware zoning enforcement is preferred, edit the zoning database to have zoned port IDs (PIDs) for that port. ZONE-1027 Message Zoning transaction aborted . . Message Type LOG Severity INFO Probable Cause Indicates the zoning transaction was aborted because of a variety of potential errors. The error reason variable can be one of the following conditions: • Zone Merge Received: The fabric is in the process of merging two zone databases. • Zone Config update Received: The fabric is in the process of updating the zone database. • Bad Zone Config: The new configuration is not viable. • Zoning Operation failed: A zoning operation failed. • Shell exited: The command shell has exited. • Unknown: An error was received for an unknown reason. • User Command: A user aborted the current zoning transaction. • Switch Shutting Down: The switch is currently shutting down. Most of these error conditions are transitory. Recommended Action Try again after some time. Verify that only one administrator is modifying with the zone database at a time. 896 Fabric OS Message Reference 53-1002749-01