Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 684

5 PS-1006 PS-1006 Message Failed to add fabricmode toptalker monitors on domain=, because end-to-end monitors are configured on this switch. Message Type LOG Severity WARNING Probable Cause Indicates that end-to-end monitors are configured on the switch. Recommended Action Delete end-to-end monitors on the switch and re-install the fabric mode Top Talker monitor. End-to-end monitors and fabric mode Top Talker monitors are mutually exclusive. PS-1007 Message Failed to add Fabricmode Top Talker on domain=. . Message Type LOG Severity WARNING Probable Cause Indicates that FC Routing (FCR) is enabled on the specified fabric. Recommended Action Top Talker cannot be installed on a fabric with FCR service enabled. In case Top Talker must be installed on a fabric, disable FCR using the fosconfig --disable fcr command. PS-1008 Message Failed to delete fabricmode Top Talker monitor on domain , Failure reason: . Message Type LOG Severity WARNING Probable Cause Indicates that the fabric is not stable, the domain is not reachable, or the resource is not available. Recommended Action Wait for the fabric to become stable and then execute the perfttmon --delete fabricmode command. 662 Fabric OS Message Reference 53-1002749-01