Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 639

MS-1001 5 MS Messages MS-1001 Message MS Platform Segmented port= (0x) ( (0x)). Message Type LOG Severity WARNING Probable Cause Indicates that the Management Server (MS) has segmented from another switch domain at the specified port because of errors or inconsistencies defined in the MS platform service. Recommended Action Reboot or power cycle the switch. MS-1002 Message MS Platform Service Unstable(). Message Type LOG Severity INFO Probable Cause Indicates that the Management Server (MS) platform service is unstable. The message string value can be one of the following: • No Resp for GCAP from: The switch did not respond to a request for a GCAP (MS Get Capabilities) command. • GCAP sup but not PL by: GCAP is supported but the flag for MS platform service is not set. • GCAP Rejected (reason =BUSY) by: GCAP is not supported by another switch. • Reject EXGPLDB from: The request to the exchange platform database was rejected. The remote switch may be busy. The domain number is the target domain that caused the error. Recommended Action The recommended actions are as follows: • No Resp for GCAP from: No action is required. • GCAP sup but not PL by: Set the flag for the MS platform service. • GCAP Rejected (reason =BUSY) by: Execute the firmwareDownload command to upgrade the firmware level on the switch to a level that supports reliable commit service (RCS). RCS is supported in Fabric OS v2.6, v3.1 and later, and v4.1 and later. • Reject EXGPLDB from: Wait a few minutes and try the command again. Fabric OS Message Reference 617 53-1002749-01