Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 768

5 SEC-1321 SEC-1321 Message Failed secure mode enable command. Reason: . Message Type LOG Severity ERROR Probable Cause Indicates the security enable failed on the fabric because the switch has a conflicting configuration such as fabric-wide consistency configuration or AD configuration. Recommended Action Verify the security event was planned. If the security event was planned, run the fddCfg --fabwideset command or ad --clear command to clear the fabric wide consistency configuration or AD configuration and retry the secModeEnable command. SEC-1322 Message Some DCC policy is too large, distribution cancelled. Message Type LOG Severity WARNING Probable Cause Indicates this fabric is not able to support a Device Connection Control (DCC) policy with more than 256 ports. Recommended Action Reconfigure any policy that includes more than 256 ports in its member list, and then save the policy configuration changes. SEC-1323 Message Key(s) \"\" ignored during configdownload. Message Type LOG Severity INFO Probable Cause Indicates the specified key is ignored during configuration download. Recommended Action Verify the event was planned. If the event was planned, no action is required. If the event was not planned, take appropriate action as defined by your enterprise security policy. 746 Fabric OS Message Reference 53-1002749-01