Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 789

SEC-3048 5 SEC-3048 Message FIPS mode has been enabled in the system using force option. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates the system has been forced to Federal Information Processing Standards (FIPS) mode. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Look for the status of the prerequisites that did not conform to FIPS mode. SEC-3049 Message Status of bootprom access is changed using fipscfg CLI to : . Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates the status of boot PROM access has changed using the fipsCfg command. Recommended Action No action is required. SEC-3050 Message Event: , Status: success, Info: Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates the specified Secure Shell (SSH) utility operation was performed. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Fabric OS Message Reference 767 53-1002749-01