Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 652

5 NS-1004 Recommended Action To avoid disruption of traffic in the event of an unplanned failover, schedule a firmware download so that the active and standby CPs have the same firmware version. Reduce the local device count to follow the capability of the earliest version of firmware. NS-1004 Message Number of local devices , exceeds the standby can support , can't sync. Message Type LOG Severity INFO Probable Cause Indicates that the Name Server on the standby control processor (CP) has a lower supported capability than the active CP because of different firmware versions running on the active and standby CPs. This means that the active and standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will be disruptive. Recommended Action To avoid disruption of traffic in the event of an unplanned failover, schedule a firmware download so that the active and standby CPs have the same firmware version. Reduce the local device count to follow the capability of the earliest version of firmware. NS-1005 Message Zone size of has over the supporting limit of for the remote switch domain ID . Message Type LOG Severity WARNING Probable Cause Indicates the effective zone size has exceeded the limit that a remote switch can support. The oversized portion will be truncated. Recommended Action Reduce the zone size to 1024 or smaller, or upgrade the software of the remote switch to support 2048 zones. NS-1006 Message Duplicate WWN was detected with PID 0x and 0x. Message Type LOG Severity WARNING Probable Cause Indicates that an existing device has the same World Wide Name (WWN) as that of a new device that has come online. 630 Fabric OS Message Reference 53-1002749-01