Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 356

5 FCOE-1026 FCOE-1026 Message FDISC/FLOGI mismatch. FDISC addressed to different FCF than base FLOGI. Message Type LOG Severity WARNING Probable Cause Indicates that the base port has sent a fabric login (FLOGI) but the subsequent FDISC frames that were received on the switch do not match the original FLOGI. Recommended Action It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance. FCOE-1027 Message : :::::. Message Type LOG Severity ERROR Probable Cause Indicates that the Fibre Channel Forwarders (FCF) controller is not found for the DA. The end node may be sending the FLOGI with a wrong DA MAC address. Recommended Action Some parameters are not exchanged correctly between the switch and the end device. Reconfigure the port. FCOE-1028 Message : :::::::. Message Type LOG Severity ERROR Probable Cause Indicates that the FCoE device with the specified World Wide Name (WWN) is not a member of the login group. Recommended Action Change the FCoE login group policy on the switch using the fcoelogingroup command so that the device can log in. 334 Fabric OS Message Reference 53-1002749-01