Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 182

5 AUTH-3004 AUTH-3004 Message Event: , Status: failed, Info: Neighboring switch has a conflicting authentication policy; Port disabled. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates that the specified E_Port was disabled because the neighboring switch rejected the authentication negotiation, and the local switch has a strict switch authentication policy. Recommended Action Correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port using the portEnable command. AUTH-3005 Message Event: , Status: failed, Info: Rejecting authentication request on port because switch policy is turned OFF. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates that the local switch has rejected the authentication request, because the switch policy is turned off. If the neighboring switch has a strict (ON) switch policy, the port will be disabled due to conflicting configuration settings. Otherwise, the E_Port will form without authentication. Recommended Action If the specified port is disabled, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch using the portEnable command. If the E_Port formed, no action is required. AUTH-3006 Message Event: , Status: failed, Info: Authentication failed on port due to mismatch of DH-CHAP shared secrets. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates that a Diffie Hellman - Challenge Handshake Authentication Protocol (DH-CHAP) authentication operation failed on the specified port due to mismatched response values between two entities. The error may indicate that an invalid entity tried to connect to the switch. 160 Fabric OS Message Reference 53-1002749-01