Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 541

FW-1429 5 FW-1429 Message Switch status change contributing factor: Power supplies are not redundant. Message Type LOG Severity WARNING Probable Cause Indicates that the switch is not in a healthy state. This occurred because the power supplies are not in the correct slots for redundancy. Recommended Action Rearrange the power supplies so that one is in an odd slot and another in an even slot to make them redundant. FW-1430 Message Switch status change contributing factor . Message Type LOG Severity WARNING Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of faulty temperature sensors is greater than or equal to the policy set by the switchStatusPolicySet command. A temperature sensor is faulty when the sensor value is not in the acceptable range or is faulty. Recommended Action Replace the field-replaceable unit (FRU) with the faulty temperature sensor. FW-1431 Message Switch status change contributing factor Fan: bad. Message Type LOG Severity WARNING Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of faulty fans is greater than or equal to the policy set by the switchStatusPolicySet command. A fan is faulty when the value is not in the acceptable range or is faulty. Recommended Action Replace the faulty or deteriorating fan field-replaceable units (FRUs). Fabric OS Message Reference 519 53-1002749-01