Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 764

5 SEC-1309 SEC-1309 Message Waiting for RCS transaction to complete: secs Message Type LOG Severity INFO Probable Cause Indicates that Fabric OS is still waiting for the reliable commit service (RCS) transaction to complete. Recommended Action Verify if there are any reliable commit service (RCS) or Reliable Transport With Response (RTWR) errors. If not, the transaction is still in progress. SEC-1310 Message Unable to determine data distribution limit of fabric. Please retry later. Message Type LOG Severity INFO Probable Cause Indicates the data distribution limit could not be obtained from all switches in the fabric. This may happen if the fabric is reconfiguring or a new domain joined the fabric. Recommended Action Retry the command when the fabric is stable. SEC-1311 Message Security mode cannot be enabled because one or more of the password policies is not set to default value. Message Type LOG Severity ERROR Probable Cause Indicates the security enable failed on the fabric because one or more switches in the fabric have password policies that are not set to the default values. Recommended Action Verify the security event was planned. If the security event was planned, run the passwdCfg --setdefault command on each switch in the fabric to set the password policies to the default values. Then verify with the passwdCfg --show command that password policies are set to the default values on all switches and retry the secModeEnable command. 742 Fabric OS Message Reference 53-1002749-01