Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 441

FICU-1004 5 FICU-1004 Message : Failed to set FICON Management Server (FMS) mode: conflicting PID Format:, FMS Mode:. Message Type LOG Severity WARNING Probable Cause Indicates that a process ID (PID) format conflict was encountered. The core PID format is required for fibre connectivity control unit port (FICON-CUP). The pid_format variable displays the PID format currently running on the fabric, and is one of the following: • 0 - VC-encoded PID format • 1 - Core PID format • 2 - Extended-edge PID format The mode variable displays whether FICON Management Server (FMS) mode is enabled, and is one of the following: 0 means FMS mode is enabled and 1 means FMS mode is disabled. Recommended Action To enable FMS mode, the core PID format must be used in the fabric. Change the PID format to core PID using the configure command and re-enable FMS Mode using the ficonCupSet command. Refer to the Fabric OS Administrator's Guide for information on core PID mode. FICU-1005 Message Failed to initialize , rc = . Message Type LOG Severity ERROR Probable Cause Indicates that initialization of a module within the fibre connectivity control unit port (FICON-CUP) daemon failed. Recommended Action Download a new firmware version using the firmwareDownload command. FICU-1006 Message Control Device Allegiance Reset: (Logical Path: 0x:0x). Message Type LOG Severity WARNING Probable Cause Indicates that the path with the specified process ID (PID) and channel image ID lost allegiance to a fibre connectivity control unit port (FICON-CUP) device. Fabric OS Message Reference 419 53-1002749-01