D-Link DGS-3620-52T CLI Guide - Page 100
config cpu access_profile profile_id
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin#create cpu access_profile profile_id 2 ip source_ip_mask 255.255.255.255 Command: create cpu access_profile profile_id 2 ip source_ip_mask 255.255.255.25 5 Success. DGS-3620-28SC:admin# 5-10 config cpu access_profile profile_id Description This command is used to configure CPU access list entries. Format config cpu access_profile profile_id [add access_id [auto_assign | ] [ethernet {[vlan | vlan_id ] | source_mac | destination_mac | 802.1p | ethernet_type } | ip {[vlan | vlan_id ] | source_ip | destination_ip | dscp | [icmp {type | code } | igmp {type } | tcp {src_port | dst_port | flag [all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port | dst_port } | protocol_id {user_define }]} | packet_content {offset_0-15 | offset_16-31 | offset_32-47 | offset_48-63 | offset_64-79 } | ipv6 {class | flowlabel | source_ipv6 | destination_ipv6 }] port [ | all] [permit | deny] {time_range } | delete access_id ] Parameters - Specify the index of the CPU access list profile. add access_id - Specify the index of an access list entry to add. The range of this value is 1 to 100. auto_assign - Specify to automatically assign the access ID. - Specify an access ID between 1 and 100. ethernet - Specify an Ethernet CPU access control list rule. vlan - Specify the VLAN name. -Specify the VLAN name. The maximum length is 32 characters. vlanid - Specify the VLAN ID. - Specify the VLAN ID between 1 and 4094. source_mac - Specify the source MAC address. - Specify the source MAC address. destination_mac - Specify the destination MAC address. - Specify the destination MAC address. 802.1p - Specify the value of the 802.1p priority tag. - Specify the value of the 802.1p priority tag. The priority tag ranges from 1 to 7. 95