D-Link DGS-3620-52T CLI Guide - Page 1020
Switch Port, Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1020 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 98 Switch Port Commands config ports [ | all] {medium_type [fiber | copper]} {speed [auto {capability_advertised {10_half | 10_full | 100_half | 100_full | 1000_full}} | 10_half | 10_full | 100_half | 100_full | 1000_full {[master | slave]}] | auto_negotiation [restart_an | remote_fault_advertised [disable | offline | link_fault | auto_negotiation_error]] | flow_control [enable | disable] | learning [enable | disable] | state [enable | disable] | mdix [auto | normal | cross] | [description | clear_description]}(1) show ports {} {[description | err_disabled | auto_negotiation | details | media_type]} 98-1 config ports Description This command is used to change switch port settings. Format config ports [ | all] {medium_type [fiber | copper]} {speed [auto {capability_advertised {10_half | 10_full | 100_half | 100_full | 1000_full}} | 10_half | 10_full | 100_half | 100_full | 1000_full {[master | slave]}] | auto_negotiation [restart_an | remote_fault_advertised [disable | offline | link_fault | auto_negotiation_error]] | flow_control [enable | disable] | learning [enable | disable] | state [enable | disable] | mdix [auto | normal | cross] | [description | clear_description]}(1) Parameters - Specify a range of ports to be configured. all - Specify to set all ports in the system. medium_type - (Optional) Specify the medium type when configuring ports that are combo ports. fiber - Specify the fiber port. copper - Specify the copper port. speed - Set port speed for the specified ports. auto - Set port speed to auto negotiation. capability_advertised - Specifies that the capability will be advertised. 10_half - Set port speed to 10_half. 10_full - Set port speed to 10_full. 100_half - Set port speed to 100_half. 100_full - Set port speed to 100_full. 1000_full - Set port speed to 1000_full. When setting copper port speed to 1000_full, users should specify master and slave mode in pair for 1000-BASE TX, and leave the 1000_full without any master or slave setting for fiber. master - (Optional) Set to master. slave - (Optional) Set to slave. auto_negotiation - Specifies that the auto-negotiation option will be configured. restart_an - Specifies to restart the auto-negotiation process. remote_fault_advertised - Specifies that the remote fault advertisement option will be configured. disable - Specifies to disable remote fault advertisement. 1015