D-Link DGS-3620-52T CLI Guide - Page 765

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters - (Optional) Enter the OSPF area ID used here. Restrictions None. Example To display OSPF area's configuration: DGS-3620-28SC:admin# show ospf area Command: show ospf area OSPF Area Settings Area ID Type Stub Import Summary LSA Stub Default Cost Translate 0.0.0.0 Normal None None None 1.1.1.1 Normal None None None 4.4.4.4 Normal None None None 5.5.5.5 Stub Enabled 1 None Total Entries : 4 DGS-3620-28SC:admin# 69-10 create ospf host_route Description This command is used to create an OSPF host route. Format create ospf host_route {area | metric } Parameters - Enter the host's IP address used here. area - (Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. - Enter the area ID value here. metric - (Optional) Specifies a metric that will be advertised. - Enter the metric value used here. This value must be between 1 and 65535. Restrictions Only Administrator, Operator and Power-User level users can issue this command. 760