D-Link DGS-3620-52T CLI Guide - Page 440

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Current work directory: "c:/d1" DGS-3620-28SC:admin# 34-5 dir Description This command is used to list all of the files located in a directory of a drive. If a path name is not specified, then all of the files in the specified drive will be displayed. If none of the parameters are specified, the files in the current directory will be displayed. If a user lists the system directory, the used space will be shown. Format dir {{unit } } {} Parameters unit - Specifies the unit ID in the stacking system. If not specified, it refers to the master unit. - Enter the unit ID value here. - Specifies the drive ID. If not specified, it refers to the current drive. - (Optional) Specify the directory to be listed. The path name can be specified either as a full path name or partial name. For a partial path name, it indicates the file is in the current directory. The drive ID also included in this parameter, for example: d:/config/bootup.cfg. Restrictions None. Example To list a directory: DGS-3620-28SC:admin#dir Command: dir Directory of c:/ Idx Info Attr Size Update Time Name 1 RUN(*) -rw- 4796564 2000/01/22 03:52:03 runtime.had 2 CFG(*) -rw- 24120 2000/01/22 23:22:58 config.cfg 3 CFG(b) -rw- 24120 2000/01/23 06:59:39 1 4 d--- 2000/01/23 22:52:50 system 30608 KB total (25700 KB free) (*) -with boot up info (b) -with backup info DGS-3620-28SC:admin# To list a system directory: 435